Waterworks
Meter Access Solutions
Durable, Field-Tested Meter Pits for Waterworks Utility Access
Bingham & Taylor offers rugged, American-made meter pits engineered for long service life in a variety of installation environments. All our meter pits are designed to provide dependable access to natural gas metering systems while resisting environmental stress and incidental surface loads. Available in multiple designs to meet a range of durability and performance needs, our meter pits are ideally suited for pedestrian and light-duty traffic applications.
Made in U.S.A.
At Bingham & Taylor, we take pride in manufacturing 100% American-made underground utility access solutions.
Materials
High-Impact Polymer
Rigid, stable, and built for longevity.
Engineered for strength and settlement resistance, this high-impact polymer provides a durable, lightweight structure for below-ground access pits. Its rigid base simplifies installation, maintains alignment over time, and resists damage from soil movement or temperature changes.
Temperature-Resistant Polymer
Robust Durability
Designed for superior performance and durability, this material is a reliable choice for a variety of installations. It provides long-lasting service even in challenging environments.
Cast Iron
Proven strength. Maximum durability.
Cast iron remains the gold standard for demanding load conditions. Proudly made in America, our valve and curb boxes are engineered for a seamless fit and consistent performance, meeting ASTM A48 Class 30 standards for exceptional resistance to stress, corrosion, and extreme environments.
Maverick™ Fiberglass-Reinforced Polymer
Composite strength. Smart-Tech ready.
Fiberglass-reinforced polymer delivers cast-iron-level strength in a lighter, non-corrosive composite that’s designed for superior AMI/AMR signal transmission, UV and temperature resistance, and long service life in any environment.
Meter Pits
Our meter pits meet the highest standards of durability, reliability, and performance. Available in injection-molded polymer or rotational-molded polymer, they are engineered to provide exceptional strength and longevity under the most demanding conditions.
Meter Pits: Injection-Molded Polymer - Specifications
Lightweight, durable, and cost-effective, our injection-molded meter pits are made from high-grade polymer—a strong, lightweight plastic designed for structural integrity and environmental resistance. This material is ideal for utility applications requiring long-term performance in a range of conditions.
- Ribbed design for added stiffness and crush resistance
- Nominal wall thickness (including ribbing): 0.5″
- Resistant to heat, cold, and UV exposure
- White interior and exterior for improved visibility
- 20,000 lb. proof load rated; ideal for pedestrian and incidental light-duty traffic
Meter Pits: Injection-Molded - 2-Piece Assemblies
Two-piece assemblies pair a straight-walled, bottom with a bullet-nosed top for strength, durability, and easy installation. Top sections clip securely to the bottom, creating a stable, reliable structure in multiple height configurations.
- Top Section Options: Bullet-nosed design; 6″, 12″, and 18″ heights
- Bottom Section: Straight-walled 24″ diameter x 30″ height; Has two 3″ pipe entry areas
- Assembly Heights: 36″, 42″, and 48″
- Connection: Top sections mount easily and clip firmly into place
- Pair with cast iron or polymer frames and Maverick™ or cast iron lids to build a complete meter solution
- Stabilizers available
Meter Pits: Injection-Molded - Components - Bullet-Nosed
Bullet-nosed meter pits are available in two sizes to suit a range of utility needs and installation conditions. Pair with cast iron or polymer frames and Maverick™ or cast iron lids.
- Style: Bullet-nosed design
- Two sizes: Top diameter 18″ x bottom diameter 22″ or 20″ x 24″
- Height: 30″
- Two 3″ pipe-entry areas
- Stabilizers available
Meter Pits: Injection-Molded - Components - Straight-Walled
Straight-walled meter pits are available in six sizes to suit a range of utility needs and installation conditions. Pair with cast iron or polymer frames and Maverick™ or cast iron lids.
- Style: Straight-walled
- Available in six sizes: 18″ inner diameter by 24″ high, 18″ x 30″, 18″ x 36″, 20″ x 30″, 20″ x 36″, and 24″ x 30″
- Two 3″ pipe entry areas
- Stabilizers available
Meter Pits: Injection-Molded Polymer - Bullet-Nosed with Molded-In Frame
This bullet-nosed, molded-in frame pit offers a lightweight, durable, and cost-effective solution for pedestrian and incidental light-duty traffic areas. The lid fits directly into the pit’s flush opening and accepts standard 12.5″ OD lids.
- Material: Injection-molded polymer (black standard; white optional)
- Design: Bullet-nosed shape with no frame required; Includes pipe entry areas
- Dimensions: 12″ × 22″ × 18″
- Lid Fit: Clear opening is 11.44″; Works seamlessly with 12.50″ diameter lids
- Pair seamlessly with Maverick™ or cast iron lids
Meter Pits: Rotational-Molded Polymer - Specifications
Resilient and Built for Long-Term Performance. Rotational-molded meter pits are engineered to perform reliably in tough installation conditions. With a 0.5″ nominal wall thickness and high environmental resistance, this material ensures robust durability.
- Resistant to heat, cold, and UV exposure
- Includes molded pipe entry points (3″ and 4″)
- White interior and exterior for improved visibility
- 11,000 lb. proof load rated; Ideal for pedestrian and incidental light-duty traffic
Meter Pits: Rotational-Molded Polymer - Small & Large Diameter
Resilient and Built for Long-Term Performance, rotational-molded meter pits are ideal for pedestrian and incidental, light-duty traffic.
- Style: Black with white interior for increased visibility
- Small: Tapered design has a smaller top diameter than the base, available in 15″, 18″, 20″, & 24″ tops with 18″–24″ heights
- Large: have a consistent diameter from 30″ or 36″ and come in 30 or 36″ heights
- Both styles have two pipe entry areas (3″ and 4″)
- Pair seamlessly with cast iron or polymer frames and Maverick or cast iron lids
Meter Frames & Rings
Meter frames provide a secure, stable foundation for your lid, ensuring long-term performance of the entire meter pit system. From heavy-duty cast iron styles to lightweight polymer options, our frames & rings are engineered to suit a wide range of applications, soil conditions, and access requirements. Explore a variety of meter frame designs engineered to fit 18”, 20”, and 21” meter pits.
Meter Pit Frames: Standard Cast Iron
Our standard, cast iron meter frames come in two styles: A-Style (Recessed) with flush-fit and C-Style (Overlapping) with lip.
- Material: Durable American-made cast iron
- A-Style (Recessed): Flush-fit design positions the lid slightly below grade for a clean finish—reducing trip hazards while maintaining reliable access
- C-Style (Overlapping): Overlapping lip provides added protection against dirt, debris, and weather. Ideal for outdoor environments and heavy foot traffic, extending the life of the lid and internal components.
- Compatibility: Fits seamlessly with our utility access pits and cast iron and Maverick™ composite lids
Meter Pit Frames: Heavy-Duty Cast Iron with Gussets
Heavy-Duty Cast Iron with Gussets: Extra stability for traffic or poor soil
- Material: Durable, American-made cast iron
- Heavy-Duty with Gussets: Reinforced gussets add strength and stability, these frames deliver extra strength to resist shifting, cracking, and load failure
- Use: For high-traffic areas or unstable soil conditions
- Compatibility: Fits seamlessly with our utility access pits and cast iron and Maverick™ composite lids
Meter Pit Frames: Cast Iron with Spikes
Cast Iron Frame with Spikes: Anchors into concrete to prevent shifting
- Material: Durable American-made cast iron
- Frame with Spikes: Fitted with anchoring spikes that secure the frame directly into surrounding concrete.
- Use: Ideal for installations where movement and shifting must be minimized. The spike design helps maintain lid alignment and frame placement, even under pressure from vibration or ground settling.
- Compatibility: Fits seamlessly with our utility access pits and cast iron and Maverick™ composite lids
Meter Pit Frames: Cast Iron 2-Piece Adjustable
Cast Iron 2-Piece Adjustable Frame: Flexible fit to match final grade
- Material: Durable American-made cast iron
- 2-Piece Adjustable: Telescoping frame offers installation flexibility by adjusting to match the final grade — a major advantage for evolving construction sites or variable terrain. It simplifies alignment during installation and provides a secure, customized fit every time
- Compatibility: Fits seamlessly with our utility access pits and cast iron and Maverick™ composite lids
Meter Pit Frames: Cast Iron Flat
Cast Iron Flat Frame: Low-profile design for warmer climates
- Material: Durable American-made cast iron
- Flat Frames: With a low-profile design, the flat frame is optimized for warmer climates where freeze-thaw cycles and snow removal aren’t a concern. It provides a clean finish and easy access while minimizing its surface footprint.
- Compatibility: Fits seamlessly with our utility access pits and cast iron and Maverick™ composite lids
Meter Pit Frames: Cast Iron Frost Proof
Designed for colder climates, this cast iron frost-proof frame includes a built-in air barrier to help protect meter pits from freezing temperatures.
- Material: Durable, American-made cast iron
- Frost Proof Frames: Ideal for cold regions requiring deeper bury depths, includes inner plastic frost pan for added insulation; Frame height: 10″
- Compatibility: Fits seamlessly with our 20″ meter pits and cast iron and Maverick™ composite A-style meter lids
Meter Pit Frames: Polymer
Lightweight strength with smart-readiness built in. High-performance polymer frames offer easy installation and superior AMI/AMR signal transmission.
- Supports 12.25″ & 12.50″ Maverick™ lids
- 20,000-lb. proof load rated yet 3.5 times lighter than cast iron
- Smooth, gusset-free design reduces trip hazards
- Excellent AMI/AMR signal transmission; helps extend battery life
- Optional locating ring for easier detection
- Fully compatible with all Bingham & Taylor pits and expander rings
24" Cast Iron Expander Rings for Meter Pits
Used to increase stability and adaptability for large meter pit installations, these rings support proper frame fitment and long-term performance.
- Material: Durable, American-made cast iron
- Use: Along with a monitor ring, required for meter pits larger than 21″ for stability. Use with 18″ and 20″ frames for added support.
- Sizes: Available in 18″ x 24″ & 20″ x 24″
- Compatibility: Designed for use with cast iron meter frames. Fits seamlessly with either cast iron and Maverick™ composite lids
Maverick™ Composite Meter Lids
Meter lids are the final layer of protection and accessibility for your meter pit. Whether you need the rugged strength of cast iron or the signal-boosting benefits of composite lids, we offer a range of secure, durable options to fit your meter system configurations.
Maverick™ Meter Lids - Overview
Lightweight strength. Long-term reliability. Our exclusive fiberglass-reinforced polymer delivers cast-iron-level durability in a lighter, non-corrosive form. Engineered for long service life and AMI/AMR signal clarity.
- UV-, heat-, and cold-resistant
- Slip-resistant surface for added safety
- Excellent AMI/AMR signal transmission
- Exceptionally strong, 20,000-lb. proof load rated, yet lightweight for easier handling and installation
Maverick™ Meter Lids: Specifications
These composite lids offer the strength needed for tough environments. These lightweight lids deliver lasting performance with smart AMI/AMR-ready features.
- Styles: Solid or thru-hole with worm-gear locking mechanism or spring-latch retainer system
- 12.25″: Fits A-style (flush-fit) cast iron or polymer frames
- 12.50″: Fits C-style (overlapping) cast iron or polymer frames
- Additional Sizes: 15.25″, 16.25″, 18.75″ and 21.25″
- AMI/AMR Smart Inserts: Available for Badger Orion, Mueller, Neptune, Sensus and other
- Options: WATER METER lettering or custom; Black color or custom; Locating puck; threaded bosses
Cast Iron Meter Lids
Meter lids are the final layer of protection and accessibility for your meter pit. Whether you need the rugged strength of cast iron or the signal-boosting benefits of composite lids, we offer a range of secure, durable options to fit your meter system configurations.
Meter Lids: Cast Iron Solid Style
Durable cast iron lids for secure, long-term coverage. Built from durable cast iron with a pentabolt and worm gear locking system, they offer long-lasting protection in any environment. Available in standard solid and heavy-weight solid.
- Material: Durable, American-made cast iron
- Locking mechanism: Pentabolt with worm-gear closure for long-term protection
- Standard Solid Lids: 10.5″, 12.25″, 12.5″, 16″, and 21″ diameters; 11 lbs. average weight
- Heavy-Weight Solid Lid: 12.5″ diameter and 23 lbs.; thicker design enhances durability and load-bearing performance
- Use: Recommended for enclosed utility applications without AMR/AMI transmitters
Meter Lids: Cast Iron - Non-Recessed Holes
Offered in 12.25″, 12.5″ and 16″ sizes, these lids have one or two non-recessed holes to accommodate transmitter devices. There is also a heavyweight one-hole version. Designed to preserve security while allowing external monitoring, they’re a common choice for AMR/AMI systems
- Material: Durable, American-made cast iron
- Locking mechanism: Pentabolt with worm-gear closure for long-term protection
- Standard Weight Sizes: 12.25″, 12.5″ and 16″
- Heavy-Weight Solid Lid: 12.5″ diameter and 23 lbs.; thicker design enhances durability and load-bearing performance
Meter Lids: Cast Iron - Recessed Holes
Offered with either one or two recessed holes. The one-hole comes in 12.25″, 12.5″, 16″ and 21″ sizes. The two-hole is offered in 12.25″ & 12.5″. The recessed shape shields devices from damage and tampering while maintaining a clean surface profile.
- Material: Durable, American-made cast iron
- Locking mechanism: Pentabolt with worm-gear closure for long-term protection
- One Recessed Hole Sizes: 12.25″, 12.5″, 16″, & 21″
- Two Recessed Holes Size: 12.25″ & 12.5″
- Use: This configuration supports advanced AMI setups while minimizing exposure above grade
Meter Boxes & Lids
Built to handle the load. Designed for long service life. Our MBX meter boxes are built for strength—with a 53,000-lb proof-load rating. Pair with ADA-compliant cast iron lids for safe, reliable performance. If you prefer a lightweight, long-lasting alternative for demanding field conditions, choose our Maverick™ composite MBX lid.
Meter (MBX) Boxes: Cast Iron Assembly
Our meter box assemblies combine a durable cast iron meter box with a heavy-duty cast iron lid for maximum protection and accessibility. Built to meet the demands of utility infrastructure, each assembly includes a deep cover seat to ensure secure lid fit and stability over time.
- Material: Durable, American-made cast iron. Available in 12″ and 18″ height
- Proof load tested to exceed 53,000 lbs.
- Deep seat area prevents lid movement and enhances security
- Oval meter lids: available in solid or oblong recessed thru-hole styles for AMR/AMI compatibility
- ADA-compliant lid design with pick holes for easy handling
Meter (MBX) Boxes: Cast Iron Components
Bingham & Taylor’s standalone cast iron meter boxes are designed for long-lasting performance in demanding environments. Their heavy-duty construction supports meter protection while allowing flexibility in lid selection.
- Material: Durable, American-made cast iron. Proof load tested to exceed 53,000 lbs.
- Available in 12″ and 18″ height
- Deep seat area prevents lid movement and enhances security
- Designed for compatibility with both cast iron and Maverick™ lids
- Ideal for upgrades, replacements, or system-standard installations
Meter (MBX) Boxes: Oval Cast Iron Lids
Our oval cast iron meter box lids are built for durability and compliance, offering long-lasting performance under heavy loads. Available in both solid and recessed thru-hole styles, they support a variety of utility needs, including AMR/AMI integration.
- Material: Durable, American-made cast iron
- Styles: Available in solid or single oblong recessed thru-hole designs
- ADA-compliant for surface openings and accessibility
- Includes pick holes for easy removal and reinstallation
Meter (MBX) Boxes: Oval Maverick™ Composite Lids
Lightweight strength. Long-term reliability. Our exclusive fiberglass-reinforced polymer delivers cast-iron-level durability in a lighter, non-corrosive form. Engineered for long service life and AMI/AMR signal clarity.
- UV-, heat-, and cold-resistant
- Slip-resistant surface for added safety
- Excellent AMI/AMR signal transmission; Available in solid or with a recessed oblong hole
- 20,000-lb. proof load rated, yet lightweight for easier handling and installation
- WATER METER lettering standard; Custom lettering and lid colors available
Essential Components to Ensure Performance, Fit & Identification
Bingham & Taylor offers one of the most extensive assortments of components and customization options in the industry—giving you the flexibility to tailor your meter pits and boxes to your local standards, site conditions, and operational requirements.
Custom Lids
Identification made clear. Branding made easy.
Add color, lettering, and logos to your lids for quick utility identification, service differentiation, or branded visibility. Available across most lid types and sizes; ask about customization options for your next order.
Stabilizers
Vital to maintaining valve alignment and reliable operation.
Stabilizers center the operating nut in the box, preventing shifting, misalignment, or damage during installation and backfilling. They ensure smoother operation, reduce wear on components, and extend service life.
Extensions
Adjustable solutions for any installation.
Extensions increase meter pit height to meet project specifications and adapt easily in the field for grade changes, resurfacing, or long-term maintenance—maintaining reliable access and precise alignment. Refer to our catalog or ask your sales manager for details.
Looking For Something Entirely Unique?
We regularly collaborate with utilities to develop fully customized solutions. If your project requires something outside of our standard offering, our in-house engineers can guide you from prototype to production—ensuring performance, fit, and functionality every step of the way.